ISO 45001 Work Health and Safety Awareness for All Staff

ISO 45001 Work Health and Safety Awareness for All Staff explains what our health and safety management system is and how it protects you and the people around you. You will learn what ISO 45001 is, how its structure and the Plan, Do, Check, Act cycle work, why we hold certification and how it sits alongside Australian work health and safety laws. We cover our health and safety policy and objectives, consultation and participation, hazards and risks including psychosocial hazards, the hierarchy of controls and your right to stop unsafe work. You will practise reporting incidents, near misses and hazards, and learn what to expect when an auditor talks to you. Examples come from civil and construction sites, offices and small manufacturers. Duration: 30 minutes.

What you will learn

Module 1: Understanding ISO 45001

  • What ISO 45001 Is

    This lesson introduces ISO 45001, the international standard for occupational health and safety management systems. Key points: a health and safety management system is the way we plan, run, check and improve our work so people go home safe and well; ISO 45001:2018 is the current edition, with a 2024 amendment on climate change, and a revision is expected in 2027; ISO 45003 gives guidance on psychological health and safety; the standard follows the harmonized structure of clauses 4 to 10, with worker participation built into leadership; and it runs on the Plan, Do, Check, Act cycle.

  • Why We Are Certified and Our Safety Policy

    This lesson explains why we hold ISO 45001 certification and what our health and safety policy means for you. Key points: our certificate comes from a certification body accredited by JAS-ANZ and is checked through regular audits; certification helps us win work and, more importantly, prevent harm; the model WHS Act 2011, or the OHS Act 2004 in Victoria, sets legal duties that certification never replaces, including duties about psychosocial hazards; our policy commits us to safe and healthy work, meeting legal requirements, consulting workers and improving; and every worker should know the policy, their contribution, the benefits and the implications of not following the system.

Module 2: Safety in Your Everyday Work

  • Hazards, Risks and the Hierarchy of Controls

    This lesson explains how we identify hazards and control risks. Key points: a hazard is anything that could cause harm, and risk is the chance and severity of that harm; hazards can be physical, chemical, biological, ergonomic or psychosocial, such as excessive workload, fatigue, bullying or harassment; we use the hierarchy of controls, starting with elimination and working down to personal protective equipment; tools like safe work method statements, job safety analyses, pre start checks and take five cards help apply controls on the job; and when the job changes, the risks must be looked at again.

  • Consultation, Stopping Unsafe Work and Emergencies

    This lesson covers your voice in safety and what to do when things go wrong. Key points: workers must be consulted on health and safety matters that affect them, through health and safety representatives, committees, toolbox talks and pre start meetings; you can raise concerns at any time without fear of reprisal; if you believe there is a serious and imminent risk to health or safety, you can stop work and remove yourself, then tell your supervisor straight away; know the emergency plan, assembly point, first aiders and fire equipment for your workplace; and serious incidents may need to be notified to the regulator, with the scene preserved.

Module 3: Speaking Up and Audits

  • Reporting Incidents, Hazards and Improvements

    This lesson explains what to report, how to report it and what happens if the system is not followed. Key points: report injuries, illnesses, incidents, near misses, hazards and psychosocial concerns through our reporting system or to your supervisor; near misses are free lessons that help us prevent the next injury; we investigate causes and take corrective action, using the hierarchy of controls; improvement ideas are welcome; not following the system can lead to serious injury, illness, prosecution, lost work and audit findings; and reporting is always the right thing to do, without fear of blame.

  • When an Auditor Talks to You

    This lesson prepares you for internal and external health and safety audits. Key points: auditors check that the system works in practice, not to catch you out; internal audits are run by our trained auditors and external audits by our certification body; you may be asked about the hazards of your task, the controls you use, how you were consulted, what you would do in an emergency and how you report incidents; answer honestly, show rather than tell, and say if you do not know; never guess or cover up; and findings are major or minor nonconformities or opportunities for improvement, which we fix together.

How the course works

Every lesson is narrated and hands on, with sorting, sequencing and flip card activities and realistic workplace scenarios. A quiz closes each module and a final assessment, with questions shuffled every attempt, confirms your understanding. Pass with 80% or more to receive your certificate.

Frequently asked questions

How long is the ISO 45001 Work Health and Safety Awareness for All Staff course?

The course takes about 30 minutes. It has 3 modules and 6 narrated, interactive lessons, and you can stop and pick up where you left off at any time.

Do I get a certificate?

Yes. Complete every lesson and module quiz, then pass the final assessment with 80% or more. Your certificate is issued straight away, emailed to you and carries a unique ID that employers and auditors can check.

How much does it cost?

This course is $49 including GST and yours to keep. Teams of 5 or more get 10% off every seat, with one payment and one tax invoice.

Can I try it before I buy?

Yes. The first lesson of every course is free to try, with no account needed.

Is this course accredited?

No. It is online training with an assessment and a certificate of completion, which gives you training records for your ISO audit. It is not a nationally accredited qualification.

Which edition of the standard does it cover?

The current editions as at November 2026: ISO 9001:2026, ISO 14001:2026, ISO 45001:2018 (revision expected in 2027), ISO/IEC 27001:2022, ISO/IEC 42001:2023 and ISO 19011:2026 for auditing.

Who is this course for?

It is written for all staff in Australian organisations that are certified, or working toward certification, to ISO management system standards.

Can I buy training for my whole team?

Yes. Contact Provider Compliance on 1800 299 452 or info@providercompliance.com.au for team access and bulk pricing.

Related courses

Free guides

Browse all ISO courses.