ISO 45001 for Managers and Supervisors

ISO 45001 for Managers and Supervisors shows the people who run crews, sites and teams how our occupational health and safety management system works in practice. You will learn what leadership means under the standard, how to consult workers and involve them in decisions, and how the model WHS Act 2011 and the Victorian OHS Act 2004 sit above the system, including psychosocial hazard duties and the guidance in ISO 45003. We then cover hazard identification, the hierarchy of controls, contractors and procurement, management of change and emergency preparedness, before finishing with incident investigation, corrective action, monitoring, internal audit and the revision expected in 2027. Throughout, we make one point clear: certification never replaces your legal duties. Duration: 60 minutes.

What you will learn

Module 1: Leadership, Participation and the Law

  • What ISO 45001 Asks of Managers

    This lesson explains what ISO 45001 is and why managers and supervisors are central to making it work. Key points: ISO 45001:2018 sets out requirements for an occupational health and safety management system and follows the same harmonized structure as ISO 9001 and ISO 14001; it works on a plan, do, check, act cycle; top management must take accountability, set the policy and provide resources; supervisors turn the system into daily practice on site; and the standard never replaces the duties set by work health and safety law.

  • Consultation and Participation of Workers

    ISO 45001 places worker consultation and participation inside the leadership clause, and Australian law has its own consultation duties. This lesson explains the difference between consulting and participating, what topics workers should have a say in, and how to remove barriers such as language, shift patterns and fear of blame. Key points: consult before decisions are made, not after; involve non managerial workers in hazard identification, incident investigation and choosing controls; work with health and safety representatives and committees where they exist; and record what was raised and what you did about it.

  • Legal and Other Requirements

    This lesson explains how Australian work health and safety law sits above our ISO 45001 system. Key points: the model WHS Act 2011 applies in most jurisdictions and places a primary duty on the person conducting a business or undertaking, with due diligence duties on officers and duties on workers; Victoria has its own OHS Act 2004; psychosocial hazards must be managed like any other risk, and Victoria's psychological health regulations commenced on 1 December 2025; ISO 45003 offers guidance on psychosocial risk; and the standard requires us to identify our legal and other requirements, keep them current and evaluate compliance.

Module 2: Hazards, Risks and Controls

  • Identifying Hazards

    Hazard identification must be ongoing and proactive, not something done once for the audit. This lesson covers where hazards come from, the methods we use to find them, and how to assess risk once they are found. Key points: look at routine and non routine work, people, plant, the work environment, how work is organised and past incidents; use prestart checks, site inspections, task analysis and talking to workers; consider contractors, visitors and the public; assess how likely and how serious harm could be; and record hazards so they can be controlled and reviewed.

  • The Hierarchy of Controls

    Once a risk is assessed, controls must be chosen in a set order of effectiveness. This lesson explains the hierarchy of controls as it is used in Australian WHS practice and in ISO 45001. Key points: always try to eliminate the hazard first; if that is not reasonably practicable, substitute, isolate or use engineering controls; administrative controls and personal protective equipment are the least effective and should back up, not replace, higher controls; most jobs need a combination; and every control must be maintained, checked and reviewed to make sure it still works.

  • Managing Psychosocial Risk

    Psychosocial hazards can cause serious harm and must be managed through the same system as physical hazards. This lesson shows supervisors how to apply the risk process to psychological health, drawing on ISO 45003 guidance and Australian WHS duties. Key points: common hazards include excessive workload, poor support, unclear roles, poor change management, bullying, harassment, aggression and isolated work; consider how hazards combine and how long people are exposed; controls should change how work is designed, not just offer support after harm; and use data like overtime, turnover and complaints to spot problems early.

Module 3: Operational Control

  • Contractors and Procurement

    Many serious incidents involve contractors, labour hire workers or newly purchased plant. This lesson explains how ISO 45001 expects us to control safety risk in what we buy and who we engage. Key points: check safety capability before engaging a contractor; set clear safety requirements in contracts and purchase orders; induct, supervise and monitor contractors on site; coordinate with other duty holders, because WHS law requires consultation, cooperation and coordination; check new plant, chemicals and equipment before use; and remember that outsourcing a task does not outsource our legal duty.

  • Management of Change

    Change is one of the most common triggers for incidents. ISO 45001 expects planned changes to be assessed and controlled before they happen, and unplanned changes to be reviewed. This lesson covers what counts as a change, how to run a simple change review, and how to avoid the trap of small changes adding up. Key points: changes include new plant, methods, sites, people, rosters, laws and suppliers; assess hazards and consult workers before the change; update procedures, training and risk assessments; check the result after the change; and review temporary changes too.

  • Emergency Preparedness and Response

    Every workplace needs a planned response to the emergencies it could realistically face. This lesson covers how to identify potential emergencies, plan and resource the response, and test it so it works on the day. Key points: base emergency plans on your actual sites and activities, such as fire, chemical spills, trench collapse, vehicle incidents, medical events and severe weather; include first aid, communication and contact with emergency services; make sure contractors and visitors know the plan; run drills and exercises; and review the plan after drills, real events and changes.

Module 4: Checking and Improving

  • Incident Investigation and Corrective Action

    Incidents and nonconformities are chances to find and fix weaknesses in the system. This lesson covers what to do when something goes wrong, from immediate response to corrective action. Key points: make the scene safe and care for people first; notify the regulator where the law requires it and preserve the site; investigate with workers involved, looking for system causes rather than blame; choose corrective actions that address root causes and use the hierarchy of controls; check that actions were completed and worked; and share the lessons across sites.

  • Monitoring, Measurement and Internal Audit

    Clause 9 of ISO 45001 asks us to check how well the system is working. This lesson covers what to monitor, the difference between leading and lagging indicators, how we evaluate legal compliance, and what to expect from internal audits. Key points: measure both what is going right, such as inspections and consultation, and what has gone wrong, such as injuries; use data to make decisions, not just reports; evaluate compliance with legal and other requirements on a planned basis; internal audits check whether the system works and is followed; and supervisors should welcome audits and act on findings.

  • Management Review and the 2027 Revision

    The final lesson covers how top management reviews the safety system, how we drive continual improvement, and what the expected 2027 revision of ISO 45001 may mean. Key points: management review looks at performance, incidents, audit results, consultation, legal compliance, risks and resources, and leads to decisions and actions; continual improvement means steadily getting better, not just fixing problems; ISO 45001:2018 remains the current edition, with a revision expected in 2027 and a transition period to follow; and above all, certification never replaces our legal duties.

How the course works

Every lesson is narrated and hands on, with sorting, sequencing and flip card activities and realistic workplace scenarios. A quiz closes each module and a final assessment, with questions shuffled every attempt, confirms your understanding. Pass with 80% or more to receive your certificate.

Frequently asked questions

How long is the ISO 45001 for Managers and Supervisors course?

The course takes about 60 minutes. It has 4 modules and 12 narrated, interactive lessons, and you can stop and pick up where you left off at any time.

Do I get a certificate?

Yes. Complete every lesson and module quiz, then pass the final assessment with 80% or more. Your certificate is issued straight away, emailed to you and carries a unique ID that employers and auditors can check.

How much does it cost?

This course is $99 including GST and yours to keep. Teams of 5 or more get 10% off every seat, with one payment and one tax invoice.

Can I try it before I buy?

Yes. The first lesson of every course is free to try, with no account needed.

Is this course accredited?

No. It is online training with an assessment and a certificate of completion, which gives you training records for your ISO audit. It is not a nationally accredited qualification.

Which edition of the standard does it cover?

The current editions as at November 2026: ISO 9001:2026, ISO 14001:2026, ISO 45001:2018 (revision expected in 2027), ISO/IEC 27001:2022, ISO/IEC 42001:2023 and ISO 19011:2026 for auditing.

Who is this course for?

It is written for whs managers and supervisors in Australian organisations that are certified, or working toward certification, to ISO management system standards.

Can I buy training for my whole team?

Yes. Contact Provider Compliance on 1800 299 452 or info@providercompliance.com.au for team access and bulk pricing.

Related courses

Free guides

Browse all ISO courses.