Corrective Action and Root Cause Analysis for ISO
When something goes wrong, the way we respond decides whether it happens again. This course shows managers and system owners how to handle nonconformities, incidents and complaints in an ISO 9001, ISO 14001 or ISO 45001 management system. You will learn how the three differ and how they connect, the difference between containment and correction and true corrective action, and how to find root causes using the 5 whys and fishbone diagrams. We then cover how to check that actions actually worked, how to update risks, procedures and the wider system, and which records to keep so we can show the loop was closed. Examples come from civil sites, workshops, design offices and IT help desks. Duration: 30 minutes.
- 30 minutes
- 3 modules
- 6 interactive lessons
- Recommended training
- For Managers and System Owners
- Certificate on passing
- $39 inc GST
What you will learn
Module 1: Understanding Nonconformity
- Nonconformity, Incident or Complaint?
Nonconformities, incidents and complaints are three different ways that problems reach us, and each has its own path in our system, but all of them can lead to corrective action. This lesson explains each term in plain language. Key points: a nonconformity is any requirement not met, whether found by an audit, an inspection or a worker; an incident is an event that caused or could have caused harm, including near misses and environmental spills; a complaint is a client or community member telling us they are unhappy; some incidents must also be notified to the regulator; and every one of them is a chance to improve.
- Correction Versus Corrective Action
Two words that sound alike mean very different things. A correction, often called containment, deals with the immediate problem. Corrective action removes the cause so the problem does not come back. This lesson explains both and the steps clause 10.2 of the ISO standards is about in broad terms. Key points: contain first, to stop harm and deal with the consequences; then decide whether corrective action is needed based on the risk; review the problem, find the root cause and check whether it could happen elsewhere; take action in proportion to the risk; and review whether it worked.
Module 2: Finding the Root Cause
- The 5 Whys
The 5 whys is a simple way to dig below the obvious answer by asking why, again and again, until you reach a cause you can actually fix. This lesson shows how to use it well. Key points: start with a clear, factual problem statement; ask why at each level and check the answer with evidence; stop when you reach a cause in the system that we control, which may take fewer or more than five steps; human error is a symptom, not a root cause; and involve the people who do the work, because they usually know the real reasons.
- Fishbone Diagrams and Choosing a Tool
Some problems have several causes working together. A fishbone diagram, also called a cause and effect or Ishikawa diagram, helps a team look at all the possible causes before deciding which ones matter. This lesson shows how to build one and how to choose between the fishbone and the 5 whys. Key points: write the problem at the head; brainstorm causes under headings such as people, methods, equipment, materials, environment and measurement; test the likely causes with evidence; then use the 5 whys on the strongest ones; and use the simplest tool that fits the problem.
Module 3: Closing the Loop
- Checking Effectiveness
A corrective action only counts if it works. This lesson explains how to plan and carry out an effectiveness check, so we know the cause has really been removed. Key points: decide how you will check effectiveness when you agree the action, not afterwards; give every action one owner and a realistic due date; allow time for the action to work before checking; use fresh evidence such as a new sample, data trends or observation; completed tasks such as a toolbox talk are not proof on their own; and if the problem is still there, reopen the action and look again at the cause.
- Updating Risks, the System and Records
Corrective action is not finished until the wider system learns from it. This lesson covers the final steps: updating our risks and opportunities, changing procedures, training and other parts of the system where needed, checking whether the same problem could occur elsewhere, and keeping records that show the whole loop. Key points: update the risk register when a problem shows a risk was missed or underrated; share lessons with other sites and teams; manage changes to the system in a planned way; keep records of the problem, cause, action and effectiveness check; and feed trends into management review.
How the course works
Every lesson is narrated and hands on, with sorting, sequencing and flip card activities and realistic workplace scenarios. A quiz closes each module and a final assessment, with questions shuffled every attempt, confirms your understanding. Pass with 80% or more to receive your certificate.
Frequently asked questions
How long is the Corrective Action and Root Cause Analysis for ISO course?
The course takes about 30 minutes. It has 3 modules and 6 narrated, interactive lessons, and you can stop and pick up where you left off at any time.
Do I get a certificate?
Yes. Complete every lesson and module quiz, then pass the final assessment with 80% or more. Your certificate is issued straight away, emailed to you and carries a unique ID that employers and auditors can check.
How much does it cost?
This course is $39 including GST and yours to keep. Teams of 5 or more get 10% off every seat, with one payment and one tax invoice.
Can I try it before I buy?
Yes. The first lesson of every course is free to try, with no account needed.
Is this course accredited?
No. It is online training with an assessment and a certificate of completion, which gives you training records for your ISO audit. It is not a nationally accredited qualification.
Which edition of the standard does it cover?
The current editions as at November 2026: ISO 9001:2026, ISO 14001:2026, ISO 45001:2018 (revision expected in 2027), ISO/IEC 27001:2022, ISO/IEC 42001:2023 and ISO 19011:2026 for auditing.
Who is this course for?
It is written for managers and system owners in Australian organisations that are certified, or working toward certification, to ISO management system standards.
Can I buy training for my whole team?
Yes. Contact Provider Compliance on 1800 299 452 or info@providercompliance.com.au for team access and bulk pricing.
Related courses
Free guides
Browse all ISO courses.