Part of Provider Compliance, NDIS and aged care consultants1800 299 452 · info@providercompliance.com.au
Free guide

Manual handling for disability and aged care support workers

Last reviewed 21/11/2026 by Provider Compliance against official sources

Support work is physical. Transfers, repositioning someone in bed, pushing a wheelchair up a ramp, helping with a shower in a tight bathroom: every shift involves tasks that can strain a back or shoulder. Many of these injuries build up slowly, so workers often do not notice until the damage is done. This guide explains what makes a task hazardous under work health and safety (WHS) laws, how providers and workers share responsibility, how to assess a task, the safe techniques and equipment that protect you and the person you support, and what good training looks like.

What is a hazardous manual task?

Safe Work Australia describes a hazardous manual task as one where you lift, lower, push, pull, carry or otherwise move, hold or restrain any person, animal or thing, and it involves one or more of:

In support work that includes transfers, repositioning, catching or steadying someone, bending over a low bed during personal care, pushing heavy wheelchairs and carrying shopping. Handling people carries extra risk because a person can move suddenly, lose their balance or be unable to help with the move.

These tasks can cause musculoskeletal disorders such as sprains and strains, back injuries, joint damage and nerve problems. Some happen in a moment, like a twist during a transfer. Many come from gradual wear and tear over months.

Who is responsible

Under the model WHS laws, the provider, as a person conducting a business or undertaking (PCBU), must manage manual task risks so far as is reasonably practicable: identify the hazards, eliminate the risk or, if that is not possible, minimise it, provide suitable equipment, information, training and supervision, and consult the workers doing the work. The model Code of Practice explains how. Check with your WHS regulator whether the Code has legal effect in your state or territory.

Workers must take reasonable care of their own health and safety and not put others at risk, follow reasonable instructions, and cooperate with the provider's safety policies and procedures. In plain terms: follow the plan, use the equipment, and speak up.

Assessing the risk

Providers should do a risk assessment, in consultation with workers, for any manual task that may be hazardous, unless the risk and its controls are already well known. For people handling, that usually means a mobility assessment by a physiotherapist, occupational therapist or nurse, written into the person's support or care plan: how the person moves, how much they can help, what equipment to use and how many workers are needed.

Before any task on shift, run a quick check of four things:

CheckAsk yourself
The taskWhat does the plan say? Do I need to bend, twist, reach or hold a load away from my body?
The personHow are they today? Tired, unwell, in pain, distressed? Do they understand what we are about to do and can they help?
MeAm I trained for this equipment? Am I sore or fatigued? Is the second worker here if the plan says two?
The environmentIs there room to move? Is the floor wet or cluttered? Is the bed at the right height and the brakes on?

If anything has changed since the plan was written, stop and check with your team leader before you go ahead.

Controls: from most to least effective

WHS law uses a hierarchy of controls. The best option removes the hazard altogether; the weakest relies on people doing the right thing every time:

  1. Eliminate the task, for example by supporting the person to move themselves with prompts and the right furniture.
  2. Substitute, isolate or engineer a safer way: hoists, slide sheets, height adjustable beds, shower chairs, and redesigning a cramped bathroom.
  3. Administrative controls such as procedures, task rotation, two worker transfers and training.

Safe Work Australia notes that administrative controls and personal protective equipment are the least effective on their own because they depend on human behaviour. Good lifting technique matters, but it is never a substitute for the right equipment.

Safe techniques in plain terms

The model Code is clear that no worker should fully lift a person, other than a small infant, without help from equipment, assistive devices or another worker. Beyond that, these habits reduce strain:

Equipment

Common handling aids include slide sheets, transfer boards and belts, turntables, standing and full hoists, and electric beds. Before every use, check the equipment is clean, undamaged, charged and the right type and size for the person. Slings must match the person and the hoist. Never use equipment you have not been trained on, and never use a two person hoist alone, even when the shift is busy. The Code tells providers to resource two person tasks properly so that workers under time pressure do not attempt them alone.

When to stop and report

Stop and get advice if the plan does not match the person's needs today, the equipment is faulty or missing, the second worker is not available, or the person is falling. Do not try to catch a falling person: guide them to the floor if you can do so safely, protect their head, and follow your falls procedure. Never lift someone off the floor without the right equipment and assessment.

Report hazards, faulty equipment, near misses, early aches and pains, and injuries through your incident and hazard system. Early reports of discomfort are one of the best ways to find a task that needs fixing before someone is seriously hurt.

Training expectations

The model Code says manual handling training should be given at induction and as part of an ongoing program, to workers who do, supervise or manage hazardous manual tasks. It should cover the hazards, the specific risks and controls in place, safe methods including the use of aids and equipment, and how to report a problem. Providers should review the program when equipment, tasks or procedures change, and keep training records showing the date, topics, trainer and attendees. Equipment specific training, such as hoists, should be practical and checked by a competent person.

Train your team

Our Manual Handling course covers hazardous tasks, the hierarchy of controls, transfers, hoists and falls for disability support, and Manual Handling in Aged Care applies the same principles to care plans and the no lift approach. Add Safe Workplaces (WHS) and Falls Prevention for the full picture:

45 min
Health and Safety

Manual Handling

Moving people and objects is part of almost every shift in disability and aged care support, and musculoskeletal injuries such as back, neck and shoulder strains are among the most common injuries in our sector. This course explains what makes a manual task hazardous under work health and safety law, how to assess and control the risks, and how to move safely using good posture and the right equipment. You will learn the principles of safe transfers, how to use slide sheets, transfer aids and hoists, and how to report hazards and injuries early. The course builds knowledge only. You must also be trained and assessed as competent on the equipment and transfers set out in each participant's plan. Duration: 45 minutes.

12 lessons · 4 modules$45
50 min
Health and Safety

Manual Handling in Aged Care

Helping older people move, stand, turn and transfer is some of the most physical work in aged care, and it carries real risk for both the worker and the person. This course explains what makes a manual task hazardous under work health and safety law and the Safe Work Australia model code of practice, how we assess and control those risks, and how to carry out transfers and repositioning safely with hoists and slide sheets. It also covers falls, our no lift approach and how to report hazards and injuries. The course builds knowledge only: you must also be trained and assessed as competent on the specific equipment and for the specific person, and always follow the person's care plan and mobility assessment. Duration: 50 minutes.

8 lessons · 4 scenarios$55
45 min
Health and Safety

Safe Workplaces (WHS)

Our workplaces are participants' homes, cars, day programs and the wider community, and each one brings its own risks. This course explains how work health and safety law applies to disability and aged care support, including the duties of a person conducting a business or undertaking and the duties of every worker. You will learn how to identify hazards and use the hierarchy of controls, recognise physical and psychosocial risks in homes and the community, stay safe when working alone or driving, and report hazards, incidents and near misses. The course reflects the model Work Health and Safety laws, Victoria's Occupational Health and Safety Act and our WHS policy. Duration: 45 minutes.

11 lessons · 4 modules$45
55 min
Health and Safety

Preventing Falls and Responding Well

Falls are the leading cause of injury hospitalisation and injury death in Australia, and older people and many people with disability carry a higher risk. This course explains why falls matter, the personal and environmental factors that make a fall more likely, and the everyday actions that prevent them, including following falls risk plans and supporting people with mobility aids. It then walks through what to do when someone falls: stay calm, check for injury, do not lift, get help and follow first aid and our procedure. It also covers close observation after a fall, especially after a head strike or when the person takes blood thinners, and how to report and record the incident, with two case studies. This course builds knowledge only and does not replace a nationally accredited first aid certificate. Duration: 55 minutes.

10 lessons · 3 scenarios$55

Enrolling a whole team? Our team purchase page lets you buy seats for any mix of courses with one payment and one tax invoice, and your team dashboard tracks every learner's progress and certificates for your training register.

Frequently asked questions

Is manual handling training mandatory for support workers?

Under WHS laws, providers must give workers the information, training, instruction and supervision they need to work safely, and Safe Work Australia's model Code of Practice recommends manual handling training at induction and on an ongoing basis. For support workers who move or assist people, it is an essential part of safe work.

What makes a manual task hazardous?

A task where you lift, lower, push, pull, carry, move, hold or restrain a person or object and it involves repetitive movement, repetitive or sustained force, high or sudden force, sustained or awkward postures, or vibration.

Should I ever lift a person on my own?

No. Safe Work Australia's model Code says no worker should fully lift a person, other than a small infant, unaided. Use the equipment and number of workers set out in the person's plan.

What should I do if someone starts to fall?

Do not try to catch them. Guide them to the floor if you can do so safely, protect their head, check for injury, call for help and follow your falls procedure. Do not lift them from the floor without the right equipment and assessment.

What if the equipment I need is broken or missing?

Do not do the task another way. Tell your team leader, report the fault through your hazard system, and wait for a safe alternative.

Source: Safe Work Australia. Checked 21/11/2026. Provider Compliance is not affiliated with Safe Work Australia.