ISO Internal Auditor Training
Internal audits are how we test that our management system works the way we say it does. This course prepares internal auditors and quality leads to plan and run audits of ISO 9001, ISO 14001 and ISO 45001 systems, on their own or together. You will learn the purpose of internal audit under clause 9.2, how to build a risk based audit programme, the auditing principles in ISO 19011, and how to set scope, criteria and an audit plan. We then cover the process approach, audit trails, sampling, interviewing workers on site and in the office, observing work, objective evidence, writing and grading nonconformities, closing meetings, reports and following up corrective action. Two case studies, a civil contractor's plant pre-start checks and a design consultancy's document control, bring it all together. Duration: 90 minutes.
This course gives a certificate of completion. It is not an accredited lead auditor qualification (for example Exemplar Global or CQI and IRCA certified).
- 90 minutes
- 5 modules
- 15 interactive lessons
- Recommended training
- For Internal Auditors and Quality Leads
- Certificate on passing
- $199 inc GST
What you will learn
Module 1: Foundations of Internal Audit
- Why We Audit Internally
An internal audit is a planned, objective check of whether our management system meets its requirements and actually works in daily practice. This lesson explains what clause 9.2 of the ISO management system standards is about in broad terms, how internal audits differ from certification audits, and what a good internal audit programme gives us. Key points: audits test the system rather than individual people; they happen at planned intervals and follow a programme; auditors must be objective; and results are reported to the right managers, acted on promptly and kept as records.
- The Principles of Auditing
ISO 19011 is the international guidance on auditing management systems. The current edition was published in 2026 and its seven auditing principles are unchanged. This lesson explains each principle in plain language and shows how they guide decisions during a real audit. Key points: ISO 19011 is guidance, not a standard anyone is certified to; integrity, fair presentation, due professional care and confidentiality describe how auditors behave; independence, an evidence based approach and a risk based approach describe how audits are run; and the principles help you decide what to do when you are under pressure.
- Independence and Objectivity in Small Businesses
The standards expect auditors to be objective and impartial, and ISO 19011 says auditors should not audit their own work. In a small business that can be hard, because a few people often wear many hats. This lesson explains the common threats to objectivity and practical safeguards that work in a business of ten or twenty people. Key points: never audit work you did or manage if you can avoid it; swap areas, rotate auditors or bring in a contractor; where you cannot avoid a conflict, declare it and add a second reviewer; and never skip an area just because independence is difficult.
Module 2: Programme and Planning
- Building the Audit Programme
The audit programme is our plan for auditing the whole management system over a cycle, usually one to three years. This lesson explains the difference between the programme and an individual audit plan, and how to decide how often each process is audited. Key points: frequency is driven by importance, risk, change, past results, performance and what clients, regulators and tenders expect; every process, site and relevant clause should be covered over the cycle; high risk areas are visited more often; and the programme is a living document that changes when the business changes, including transitions to new editions of the standards.
- Scope, Criteria and the Audit Plan
Before every audit we define its objectives, scope and criteria, and write a short audit plan. This lesson explains each term and shows how to turn criteria into a practical checklist. Key points: objectives say why we are auditing; scope sets the processes, sites, activities and time period; criteria are what evidence is compared against, including the standard, our procedures, contracts and legal requirements; if you cannot name the requirement behind a question, it cannot become a nonconformity; the plan is sent to the auditee in advance; and a checklist is a guide, not a script.
- Auditing Processes: The Process Approach and PDCA
The ISO management system standards are built on the process approach and the Plan, Do, Check, Act cycle. This lesson shows how to audit a process from start to finish rather than jumping clause by clause. Key points: map each process by its inputs, activities, outputs and measures; test each stage of Plan, Do, Check, Act; process based audits follow the work as it flows and find gaps at hand over points; a process can follow every step of the procedure and still fail if results are measured but not acted on; and the most useful question is how do you know this process is working?
Module 3: Gathering Evidence
- Audit Trails and Sampling
An audit trail follows a piece of work through the system, forwards from an input or backwards from an output, to test that every step really happened. Sampling lets us draw conclusions about a whole system without checking every record. This lesson explains both. Key points: forward trails test that each step happened, backward trails test traceability; start sampling from a complete list, mix random choices with higher risk items, spread the sample across sites, shifts and months, and record how you chose it; never accept a hand picked set of files; and always report how many items you checked and how many fell short.
- Interviewing Workers on Site and in the Office
Interviews tell us how work is really done and whether people understand the system. This lesson covers preparing for interviews, asking good questions and adapting your approach for a work site and an office. Key points: check site induction and safety needs, agree timing so work is not disrupted, and explain that you are testing the system, not the person; use open questions and ask to be shown; avoid leading, closed and blaming questions; on site, talk at a safe spot and go to the work; in the office, sit with people at their screens; listen more than you talk; and let workers answer for themselves.
- Observing Work and Objective Evidence
Objective evidence is information we can verify: records we have checked, work we have seen and statements we can confirm. This lesson explains the three sources of evidence and how to observe work well. Key points: compare what you see with the procedure and note the time, place, equipment and people involved; look at the conditions around the work as well as the task; record facts with references and numbers, never opinions or rumours; treat things you overhear as leads to check, not as findings; and if you see an immediate danger, stop and tell the supervisor straight away rather than waiting for the closing meeting.
Module 4: Findings and Follow Up
- Writing Nonconformity Statements
A nonconformity statement must be clear enough that anyone reading it understands what was required, what was found and why it falls short. This lesson shows how to write findings in three parts: requirement, evidence and finding. Key points: name exactly where the requirement is written; record evidence as facts, with references, dates and numbers; state the gap in one clear sentence; describe the problem, not the fix, because the process owner decides on corrective action; use neutral language and never name or blame individuals; and check the facts with the auditee before you leave.
- Grading Findings
Consistent grading tells management how serious each finding is and how quickly it must be dealt with. This lesson explains how we grade major nonconformities, minor nonconformities and opportunities for improvement, and how to tell a major from a minor. Key points: the ISO standards do not define these grades, so we follow the definitions in our internal audit procedure, aligned with how our certification body grades; majors involve a missing or broken down requirement or serious risk; minors are isolated lapses in a working system; opportunities for improvement do not breach a requirement; and good practice is worth recording too.
- Closing Meetings, Reports and Follow Up
An audit is not finished until the results are understood, reported and acted on. This lesson covers running the closing meeting, writing the audit report and following up corrective action until it is proven effective. Key points: present good practice as well as findings, read each finding with its evidence and record any disagreement; the report gives a one page summary, scope, criteria, sample, graded findings and next steps; corrective action follows correction, root cause analysis and action to remove the cause; and a finding is closed only when fresh evidence shows the problem has stopped, not when a task is ticked off.
Module 5: Integrated Audits and Case Studies
- Auditing Integrated Systems
Many businesses run one integrated management system covering ISO 9001, ISO 14001 and ISO 45001. Because all three share the harmonized structure, common clauses can be audited once, while each standard's specific requirements still need their own evidence. This lesson explains how to plan and run an integrated audit. Key points: shared areas include context, leadership, competence, documented information, internal audit and management review; specific areas include customer requirements, environmental aspects and compliance obligations, hazards and worker consultation; look at one activity through all three lenses; balance audit time by risk; and make sure auditors are competent in every standard covered.
- Case Study: Plant Pre-start Checks
This case study follows Kurt, an internal auditor at a civil contractor, as he audits plant management on a pipeline job after two hydraulic hose failures in a month. You will see how he follows a trail from the plant register to the work face, how he samples pre-start checklists, how he handles pressure to downgrade his finding and what changed afterwards. Key points: trails across several records reveal gaps a single check would miss; the evidence decides the grade, not the supervisor's view; and the real fix came from understanding why checklists were missed, not from telling people to try harder.
- Case Study: Design Office Document Control
In our second case study, Sienna audits document control at a civil design consultancy after a client found a superseded drawing in use on site. You will see how a backward trail from one issued drawing uncovered a system gap, why she did not record it as one person's mistake, and how the business fixed the cause. The lesson ends with a summary of the whole course. Key points: trace back from the output to find where the process failed; extend the sample to see how far a problem goes; findings describe the system, not individuals; and corrective action should update risks and controls, then be proven effective.
How the course works
Every lesson is narrated and hands on, with sorting, sequencing and flip card activities and realistic workplace scenarios. A quiz closes each module and a final assessment, with questions shuffled every attempt, confirms your understanding. Pass with 80% or more to receive your certificate.
Frequently asked questions
How long is the ISO Internal Auditor Training course?
The course takes about 90 minutes. It has 5 modules and 15 narrated, interactive lessons, and you can stop and pick up where you left off at any time.
Do I get a certificate?
Yes. Complete every lesson and module quiz, then pass the final assessment with 80% or more. Your certificate is issued straight away, emailed to you and carries a unique ID that employers and auditors can check.
How much does it cost?
This course is $199 including GST and yours to keep. Teams of 5 or more get 10% off every seat, with one payment and one tax invoice.
Can I try it before I buy?
Yes. The first lesson of every course is free to try, with no account needed.
Is this course accredited?
No. This course gives a certificate of completion. It is not an accredited lead auditor qualification (for example Exemplar Global or CQI and IRCA certified).
Which edition of the standard does it cover?
The current editions as at November 2026: ISO 9001:2026, ISO 14001:2026, ISO 45001:2018 (revision expected in 2027), ISO/IEC 27001:2022, ISO/IEC 42001:2023 and ISO 19011:2026 for auditing.
Who is this course for?
It is written for internal auditors and quality leads in Australian organisations that are certified, or working toward certification, to ISO management system standards.
Can I buy training for my whole team?
Yes. Contact Provider Compliance on 1800 299 452 or info@providercompliance.com.au for team access and bulk pricing.
Related courses
Free guides
Browse all ISO courses.